Dual 16-station driven tool turrets (32 Tools Total) features high-speed 0.15-second bi-directional indexing and shortest path indexing logic for fast tool changes. The 16-station tool turret features 7-HP driven tool capability on every tool station, providing the muscle needed to handle cross and end-working milling. The 4,000-RPM driven tool system provides a constant torque of 14.75 ft lbs (20 nm)
Pre-Tensioned Double Anchored Balls Screws -
Premium quality ball screws are pre-tensioned and anchored at both ends, and then 100% inspected for parallelism to the axis guideways. The rotational torque of each ballscrew is inspected over the entire length of travel to guarantee a true smooth non-binding alignment to ensure maximum service life and the highest possible machining accuracy. The geometric ball bar test conducted on each machine checks for servo gain synchronization, backlash, lateral play, squareness, and straightness to ensure your machine will perform to our rigid accuracy and performance standards. Laser technology is employed to measure linear and pitch error accuracy and repeatability to ensure high quality standards for machine performance.
Integral (Built-in) Spindle 6,000 RPM Motors
Motors with built-in spindles provide the maximum cutting torque (There are no belts to reduce the torque and HP) and provide the highest rate of spindle acceleration and deceleration.
Parts Catcher with parts conveyor
The machine comes standard with a parts catcher and a parts conveyor to make bar work easy and efficient.The parts conveyor then carries the part to a basket.
Full “Y” Axis
The upper tool turret features a full Y-axis with ± 35mm travels for off center milling and drilling work.
Full “C” Axis on Main and Sub Spindle
The main and the sub spindle both feature an independent full “C” axis with a 0.001 degree increments for 360,000 radial positions and full contouring capability.
Barfeeder Interface
The machine comes standard with a barfeeder interface to make it easy to add a barfeeder.A variety of optional barfeeders and automatic barloaders are available to meet your production needs.
Automatic Lubrication System
The automatic lubrication system operates on a timed interval and monitors low oil level and will stop the machine at the end of the current cycle if a fault condition occurs. A meter valve regulates oil flow, which is pumped at timed intervals through nylon tubes to distributor orifices on the linear guideway trucks and the axis ballscrews.
Dealer Login
