Machine Features:

• A work-light with a swivel joint is provided so the operator can view critical work areas.
• A spindle load meter is located on the front of the control panel for easy viewing.
• A MPG (manual pulse generator) is provided w/ X1, X10, and X100 feedrate multipliers.
• A tri-color machine condition signal lamp broadcasts the machine operating condition.
• The electronics cabinet is cooled by a heat exchanger for enhanced machine reliability.
• Stainless steel doorsill guard is provided to keep the doorsill from being chipped.
• Stainless steel way covers in all three axis.
• T-slots ground to 0.625” to fit standard workholding T-nuts
• Automatic Metered Lubrication for slideways and ball screws
• Water resistant halogen lamp is included
• Inspection Report on accuracy, Instruction Manual, Tools and Tool Box all included
• Large compliment of parts and accessories in stock to ensure continued operation

 High Reliable Fanuc Servo’s and Drives

Premium Fanuc OiMC control (upgradeable to 2MB memory) is capable of high-speed machining and has the ability to add a 4th axis.  Highly accurate FANUC Digital Servo motors with look-ahead features, Graphic Display, Tool Life Management and a data server with a memory card are just a few features on this powerful FANUC control.  All of this is production capability is backed by the dependable 2-year FANUC warranty.

Double Anchored Balls Screws -

Premium quality ball screws are double-anchored and pre-tensioned, and then 100% inspected for parallelism to the axis guideways.  The rotational torque of each ballscrew is inspected over the entire length of travel to guarantee a true smooth non-binding alignment to ensure maximum service life and the highest possible machining accuracy.  The geometric ball-bar test conducted on each machine checks for servo gain synchronization, backlash, lateral play, squareness, and straightness to ensure your machine will perform to our rigid accuracy and performance standards.  Laser technology is employed to measure linear and pitch error accuracy and repeatability to ensure high quality machine performance.

Auto Shut Off –

You can set up the auto shut off mode on the control to automatically shut off once your long program is finished.  This capability enhances your ability to let the machine run lights out.

Pneumatic Counter Balance (in case of power failure) –

The machine comes with an air counter balance standard. In case of a power failure this feature will prevent the “Z” axis from dropping down to save expensive fixtures and tools.

Chip Wash-Down –

The machine comes standard with a separate coolant pump for chip wash on all sides. This allows the machine to flush all the chips easily to the front of the tank simplifying maintenance.